1967-72 Parts
1967-72 Chevrolet-GMC C/K Truck Models Fleetside, Stepside, Suburban, Panel Truck, and 1969-72 Blazer-Jimmy Premium Restoration Grade Truck Parts
Showing 1–16 of 1113 results
 | 1967-72 Hood hinge, exactly like original. Highest quality available. Coated in a EDP applied black finish. Hood Springs sold separately. Specify left, right or both. Fits: 1967-72 Chevy & GMC Trucks, 1967-72 Chevy & GMC Suburban, 1967-70 Chevy & GMC Panel Trucks & 1969-72 Chevy Blazer & 1969-72 GMC Jimmy | |
 | 1967-72 Hood hinge springs. Coated in a EDP applied black finish. Tired of those weak springs that don’t really help raise the hood anymore and when you close hood aren’t strong enough to pull the rear of hood down level with the outer cowl panel? Then get these and eliminate those problems that exist from… | |
 | 1967-72 Hood hinge bolt set. Original style black phosphate hood hinge indented hex sems bolts with thick integral washers. Includes 10 hex head sems bolts with integral washers to attach both left and right hood hinges to fender and hood. Fits: All 1967-72 C/K Chevrolet / GMC Truck, 1967-70 Chevy / GMC Panel Truck, 1967-72… | |
 | 1967-72 Hood latch assembly bolt set. This set includes hood latch striker to hood bolts, grille brace to grille bolts, and grille brace to radiator support bolts. These re original style black phosphate indented hex sems bolts with thick integral washers. Includes 10 hex head sems bolts with integral washers. 5 are used to attach… | |
 | 1967-72 Chevy-GMC C/K Radiator support to fender brace. EDP coated black finish. Interchangeable side to side as Left = Right. Sold each 2 required per vehicle. All 1967-72 Chevrolet-GMC C/K Truck, Suburban, Panel Truck, Blazer-Jimmy | |
 | Front Fender Bolt Set Provides 10 Of The Original Style Captured Washer Head 5/16-18X7/8″ Black Phosphate Bolts For Front Fender’s. Can also be purchased individually or in greater quantities by purchasing our body bolts. Made in the USA | |
 | 5/16-18X7/8″ Black Phosphate Body Bolt W/Washer. These body bolts are used extensively throughout the 1967-72 model series to attach various body panels and other parts. Sold each, or Buy 30 For $15.00 Made in the USA | |
 | Front inner fender to fender J-nut 5/16″-18. These attach to fender for body bolt to thread into to hold inner fender to fender. 8 required per side. These are the correct OE style black phosphate u-nut with captured nut instead of the later model stamped tapped barrel u-nuts sold by most. 1967-72 Chevrolet-GMC C/K Made… | |
 | Drivers side inner fender reinforcement brace. Attaches to inside edge of inner fender reinforcing the area the steering column lower shaft passes through. Often removed by previous owners when working on the vehicle and often missing because it wasn’t replaced when done. Fits: All 1967-72 Chevy-GMC C/K Truck, Suburban, Panel Truck, 1969-72 Blazer-Jimmy | |
 | “ON SALE” 1967-72 Chevy-GMC Truck Suburban Panel Truck Blazer-Jimmy Inner fender to cab bolt with convex washer. Reproduction of original. Sold each, 2 required per vehicle. | |
 | ON SALE 1967-72 Chevy-GMC Truck Suburban Panel Truck Blazer-Jimmy Inner fender to cab frame bolt galvanized F-shims. Reproduction’s of the original shim. Sold in sets of 2. Sold in pairs, normally 2 shims required per side on each truck, 4 shims will be required. | |
 | 1969-72 Blazer / 1969-72 GMC Jimmy rocker box end cap bolt kit. 17 piece set of the original style and size rocker box end cap bolts. 1 set required to install 1 rocker box end cap, 2 sets required per vehicle. Select quantity after adding to cart. Proudly Made In the USA Fits: 1969-72 Chevy… | |
 | 1967-72 Wire gutter attaching screws, original phosphate and oil finish. 8 Piece set provides enough to attach both the radiator support and cowl wire gutters. Made by original OEM manufacturer. Made in the USA | |
 | 1967-72 Voltage regulator mounting screws. 3 piece set. We also offer a Voltage Regulator Mounting Kit which includes rubber well nuts. Made in the USA | |
 | 1967-72 Voltage regulator mounting kit. Includes 3-rubber well nuts to insulate voltage regulator from damaging vibration and 3-screws required to install voltage regulator to radiator core support. Made in the USA | |
 | 1967-70 OEM Firewall Clutch Delete Plug. 1967-70 Chevy-GMC truck, Suburban, Panel Truck, Blazer-Jimmy original OEM Firewall clutch delete plug. Used to seal the clutch rod push rod firewall hole oval opening on models with a automatic transmission. Made by the original manufacturer that produced them for GM. Proudly Made In The USA | |
 | 1967-72 Taillight wire harness grommet installs on drivers side where taillight wiring harness passes through the front side of the rear bed cross sill. Prevents wiring harness wire insulation from chafing on rear cross sill metal edge, 1 required per truck. Made in the USA Fits: All 1967-72 C/K Chevrolet-GMC Truck, 1967-70 Panel Truck, 1967-72… | |
 | 1967 Tachometer Wire Harness. 1967 Tachometer wiring harness complete harness used to connect tachometer to coil. Available for models with stock points type distributor only. Fits All: C/K 1967 Chevrolet-GMC Trucks, Panel Truck, Suburban, Manufacturers Suggested Retail- $45.00 Made in the USA | |
 | 1968-72 Tachometer Harness For Points or HEI. Tachometer wiring harness complete harness used to connect tachometer to motor. Available for models with stock points type distributor or for HEI distributor models, select style needed. Can be used on 1967 models also. Points Version $30.00 HEI Version $33.00 Manufacturers Suggested Retail- $52.00-$52.00 Fits All: C/K 1968-72… | |
 | 1967-72 Speed Warning Harness 100% complete and correct to exact OEM specifications and details, used only on rare models with speed warning speedometer. Fits All: C/K 1967-72 Chevrolet & GMC Trucks, 1967-70 Chevrolet & GMC Panel Truck, 1967-72 Chevrolet & GMC Suburban, 1969-72 Chevrolet Blazer and 1969-72 GMC Jimmy Manufacturers Suggested Retail- $34.00 Made in… |