1967-72 Parts
1967-72 Chevrolet-GMC C/K Truck Models Fleetside, Stepside, Suburban, Panel Truck, and 1969-72 Blazer-Jimmy Premium Restoration Grade Truck Parts
Showing 1–16 of 1107 results
 | 1967-72 Cowl End Seals. Correct style and fit hood to cowl foam end seals. Install’s on either end of the cowl under cowl edge. Includes 2, 1 each for left and right side. Proudly Made In the USA Fits: All 1967-72 C/K Chevrolet-GMC Truck, 1967-70 Panel Truck, 1967-72 Suburban and 1969-72 Blazer-Jimmy | |
 | ON SALE 15% OFF MSRP 1969-72 Blazer-Jimmy Ignition Doors & Rear Hatch Lock Set with 2 1969-72 late style square head GM keys. Kit includes 1-Ignition lock cylinder, 2-door lock cylinders, 2-door lock gaskets, 2-lock retainers, 2-door lock pawl clips, 1 rear hatch (Liftgate) lock cylinder, with 2 matching square head GM keys. All 4… | |
 | ON SALE 20% OFF MSRP 1969-72 Blazer-Jimmy Ignition-Doors-Rear Hatch & Glovebox Lock Set with 2 1969-72 late style square head GM keys. This kit includes 1-Ignition lock cylinder, 2-door lock cylinders, 2-door lock gaskets, 2-lock retainers, 2-door lock pawl clips, 1 rear hatch (Liftgate) lock cylinder, and 1 glovebox lock cylinder with 2 matching square… | |
 | ON SALE 20% OFF MSRP 1969-72 Blazer Jimmy Liftgate Lock Set. a exact reproduction of the original 1969-72 Blazer-Jimmy rear hatch (Liftgate) lock cylinder. Includes new lock cylinder with 2 GM keys. For models with original handle only. This will not fit the generic garage door handles sold as a replacement for the original handle… | |
 | 1967-72 Chevy-GMC C/K Clutch rod boot. Attaches to firewall and used to seal opening for clutch rod where it passes through firewall to prevent heat, moisture and debris from entering cab. Replaces GM Part #6264123 | |
 | 1967-72 Wiper Motor To Wiper Transmission Arm. Steel reproduction of the arm used to attach the wiper motor to wiper transmission arms. Replaces GM Part# 4917171 | |
 | 1967-72 Wiper Motor To Wiper Transmission Arm Retaining Clip. Steel reproduction of the spring steel retaining clip used to attach the wiper motor arm to wiper transmission arms. Replaces GM Part# 4912427 Correct For 1967-72 Chevy-GMC C/K 1963-64 Cadillac 1963-64 Chevrolet Full Size Passenger Car 1964-65 Corvette 1964-65 Corvair FC 1964-67 Chevelle / El-Camino Most… | |
 | 1967-72 windshield wiper transmission arm assembly. Wiper motor transmission arms complete assembly with left & right sides. Connects to wiper motor and transfers motion to the left and right wiper arms. For: All 2 & 4 Wheel Drive Models including 1967-72 Chevrolet-GMC Truck, 1967-70 Panel Truck, 1967-72 Suburban, 1969-72 Blazer-Jimmy | |
 | 1967-72 Sun Visors Pair Colors other than black. Available in Beige, Blue, Green, Red. Original style walrus grain vinyl. Sold as a Pair Left=Right. Select color as needed. Brackets Sold Separately. Made in the USA | |
 | 1967-72 Sun visor in black, sold each. Manufactured with original style walrus grain vinyl. Sold each select quantity needed. Brackets sold separately. | |
 | 1967-72 Sun visor retainer hook, available in black only. Paint to match. Sold each, 2 required per vehicle select quantity needed. Replaces GM Part # GM 3968299 1967-72 Chevy-GMC C/K Truck, Panel Truck, Suburban, 1969-72 Blazer-Jimmy | |
 | 1967-72 Sun visor bracket. Fits all trucks, Suburban & Panel trucks. Sold each, 2 required per vehicle select quantity needed. Left = Right Blazer-Jimmy version sold below. Fits: 67-72 Truck, 67-72 Suburban, 67-70 Panel Truck | |
 | 1967-72 Headlight Adjuster Set Does Two Headlight Includes 4-Threaded Plastic Nut Inserts, 4-Adjuster Screws, 2 headlight adjuster tension springs. Chevy trucks will require 1 set and GMC trucks will require 2 sets. Specify if 1967-68 or 1969-72. | |
 | 1967-72 Windshield washer spray nozzle set. Includes both left and right windshield washer spray nozzles with required mounting screws. For: All 2 & 4 Wheel Drive Models including 1967-72 Chevrolet-GMC Truck, 1967-70 Panel Truck, 1967-72 Suburban, 1969-72 Blazer-Jimmy | |
 | 1967-72 Ground strap kit. 15 piece set. Complete set of all original gauge tinned copper ground straps and hardware required for one truck. This set includes 3-short ground straps used for passenger inner fender to frame, passenger front cab support to frame and 2nd from rear bed cross sill to frame. 2-long engine to valve… | |
 | 1967-72 Wire junction block that mounts on the passenger side fender near the battery. Alternator charging wire from alternator and fusible link to battery charging wire connect to this junction block on all year and model vehicles and gauge dash trucks with ammeter have 1 wire of the ammeter circuit also connected to this block. | |
 | 1967-72 Wire harness straps. Used to attach wiring looms to panel holes. Sold each, specify quantity after needed. Manufacturers Suggested Retail- $3.59 Made in the USA | |
 | 1966-72 Parking-Emergency brake cable frame bushings. A 2 piece set of the nylon frame guide bushings that install in frame cross member to prevent rubbing and wear on emergency brake metal cable where it passes through the frame cross member under rear if cab on drivers and passenger sides. Fits, 1966-72 Chevrolet & GMC Truck… | |
 | Original Style “Non-Stick” Black Wire Harness Tape Used To Rewrap Old Harnesses To Retain Original Factory Look And Insulate Wires From Elements. This tape is like original and has no adhesive so it will not stick to other objects but will instead stick to its-self. 1 1/4″W X 100’L Made in the USA | |
 | 1967-72 Fuse Block Firewall Gasket. 2 required per truck, 1 installs inside cab another installs outside on firewall. Proudly Made In the USA Fits: All 1967-72 C/K Chevrolet-GMC Truck, 1967-70 Panel Truck, 1967-72 Suburban and 1969-72 Blazer-Jimmy |