Bolts & Misc. Hardware
1967-72 Chevrolet-GMC C/K Truck Models Fleetside, Stepside, Suburban, Panel Truck, and 1969-72 Blazer-Jimmy Premium Restoration Grade Bolts & Misc. Hardware
Showing 1–16 of 110 results
 | 1967-72 Headlight Adjuster Set Does Two Headlight Includes 4-Threaded Plastic Nut Inserts, 4-Adjuster Screws, 2 headlight adjuster tension springs. Chevy trucks will require 1 set and GMC trucks will require 2 sets. Specify if 1967-68 or 1969-72. | |
 | 1967-72 Windshield washer spray nozzle set. Includes both left and right windshield washer spray nozzles with required mounting screws. For: All 2 & 4 Wheel Drive Models including 1967-72 Chevrolet-GMC Truck, 1967-70 Panel Truck, 1967-72 Suburban, 1969-72 Blazer-Jimmy | |
 | 1967-72 Ground strap kit. 15 piece set. Complete set of all original gauge tinned copper ground straps and hardware required for one truck. This set includes 3-short ground straps used for passenger inner fender to frame, passenger front cab support to frame and 2nd from rear bed cross sill to frame. 2-long engine to valve… | |
 | 1967-72 Wire junction block that mounts on the passenger side fender near the battery. Alternator charging wire from alternator and fusible link to battery charging wire connect to this junction block on all year and model vehicles and gauge dash trucks with ammeter have 1 wire of the ammeter circuit also connected to this block. | |
 | 1967-72 Wire harness straps. Used to attach wiring looms to panel holes. Sold each, specify quantity after needed. Manufacturers Suggested Retail- $3.59 Made in the USA | |
 | 1966-72 Parking-Emergency brake cable frame bushings. A 2 piece set of the nylon frame guide bushings that install in frame cross member to prevent rubbing and wear on emergency brake metal cable where it passes through the frame cross member under rear if cab on drivers and passenger sides. Fits, 1966-72 Chevrolet & GMC Truck… | |
 | Brake line union, used to connect brake lines. Available in 2 different sizes. 3/8-24 Female thread both sides for 3/16″ diameter lines or 7/16-24 Female thread both sides for 1/4″ diameter lines. Select size and quantity needed. Made in the USA | |
 | 1937-70 Rear axle brake line to hose tee. This tee is a 7/16-24 female thread on brake hose side and 7/16-24 female thread with inverted flare connection on other 2 sides for brake lines. Comes with correct slot on tee made to attach to bracket that brake hose connects to on top side and rear… | |
 | 1967-70 Rear axle brake line to brake hose tee. This brake hose tee is a 7/16-20 female thread on 1 side and 3/8-24 female thread on other 2 sides. Made in the USA | |
 | 1971-72 1/2 ton and 3/4 ton 2 wheel drive front disc brake line tee. This set includes a 3/8-24NF female thread brake line tee and also includes 2- 7/16-24 unions for 1/4″ brake line connections. Made in the USA | |
 | 1960-68 Parking brake cable retainer kit. 5 piece kit provides everything needed to attach parking brake cable to parking brake handle mechanism in all 1960-68 Chevy-GMC Truck, Panel Truck, Suburban. | |
 | 1969-72 Parking brake cable retainer kit. 6 piece kit provides everything needed to attach parking brake cable to parking brake foot mechanism in all 1969-72 Chevy & GMC trucks, Panel trucks, Chevrolet Blazer, GMC Jimmy & Suburban. | |
 | 1967-72 1/2ton 2 wheel drive Truck Cab Hardware Kit. Includes all the correct size Grade 5 bolts, washers & nuts required to mount cab to frame. This is the hardware only as shown in photo which does not include the rubber body mounting cushions, steel spacer sleeves & body shims as they are not included.… | |
 | 1967-72 Hood hinge bolt set. Original style black phosphate hood hinge indented hex sems bolts with thick integral washers. Includes 10 hex head sems bolts with integral washers to attach both left and right hood hinges to fender and hood. Fits: All 1967-72 C/K Chevrolet / GMC Truck, 1967-70 Chevy / GMC Panel Truck, 1967-72… | |
 | 1967-72 Hood latch assembly bolt set. This set includes hood latch striker to hood bolts, grille brace to grille bolts, and grille brace to radiator support bolts. These re original style black phosphate indented hex sems bolts with thick integral washers. Includes 10 hex head sems bolts with integral washers. 5 are used to attach… | |
 | 1967-72 Chevy-GMC C/K Radiator support to fender brace. EDP coated black finish. Interchangeable side to side as Left = Right. Sold each 2 required per vehicle. All 1967-72 Chevrolet-GMC C/K Truck, Suburban, Panel Truck, Blazer-Jimmy | |
 | Front Fender Bolt Set Provides 10 Of The Original Style Captured Washer Head 5/16-18X7/8″ Black Phosphate Bolts For Front Fender’s. Can also be purchased individually or in greater quantities by purchasing our body bolts. Made in the USA | |
 | 5/16-18X7/8″ Black Phosphate Body Bolt W/Washer. These body bolts are used extensively throughout the 1967-72 model series to attach various body panels and other parts. Sold each, or Buy 30 For $15.00 Made in the USA | |
 | Front inner fender to fender J-nut 5/16″-18. These attach to fender for body bolt to thread into to hold inner fender to fender. 8 required per side. These are the correct OE style black phosphate u-nut with captured nut instead of the later model stamped tapped barrel u-nuts sold by most. 1967-72 Chevrolet-GMC C/K Made… | |
 | Drivers side inner fender reinforcement brace. Attaches to inside edge of inner fender reinforcing the area the steering column lower shaft passes through. Often removed by previous owners when working on the vehicle and often missing because it wasn’t replaced when done. Fits: All 1967-72 Chevy-GMC C/K Truck, Suburban, Panel Truck, 1969-72 Blazer-Jimmy |