Premium Restoration
Grade Bed Patch Panels
FREE SHIPPING ON
ORDERS OVER $500.00
( Does not include oversized bulky items with a fixed
shipping cost or truck freight items, offer applies to the
continental USA. ) WARNING: Cancer & Reproductive
Harm -www.P65Warnings.ca.gov
Descriptions
in Blue are
hyperlinks to pictures and or larger description.
Left = Drivers Side, Right = Passengers Side
67-72
Long wheelbase fleetside front lower bedside 41-3/4" x 14-3/4"H.
Runs from lower front bed edge to rear wheel arch opening. Original heavy
gauge steel construction coated with a EDP applied black primer. Specify
Left or Right in cart. This item ships
Oversized I and has separate shipping charges.
67-72
Upper Wheel Arch Patch Panel 35" x 14" EDP coating heavy
gauge excellent fit, these have the correct lip on the wheel arch area
unlike many, that are missing the 1/8 bead on outer edge of the wheel
arch. This item ships Oversized I and has separate
shipping charges.
1967-72
Fleetside, Blazer, Jimmy inner bedside wheelhouse flange patch panel. This
patch panel is used to repair the area your rear wheel tubs bolt to, it
replaces the entire mounting flange that the rear wheel tub bolts to and
has all the interior nuts welded in place that you bolt the rear wheel tub
to. This part also includes the brace that joins the inner & outer
bedsides together at the top of the wheel arch. This part is a exact
reproduction of this area made with original heavy gauge steel and coated
with a EDP primer for superior corrosion resistance. Ships oversized.
Insist on the best quality available by purchasing GMCPauls high quality
panels. Specify side needed in cart. 38" X 14"
67-72
Fleetside long wheelbase bed side rear lower section from behind rear wheel to
back of bed, Original heavy 19 gauge steel construction. A quality replacement panel rolled bead on wheel arch as well as indentation below taillight area.
Specify Left or Right In Cart. This item
ships Oversized I and has separate shipping charges.
SWB trucks will need to shorten this panel for use.
1967-72
Suburban & 1967-70 Panel rear quarter panel rear lower section. OEM
gauge steel, with black EDP applied primer finish. Formed exactly like OEM
original. Replaces area behind rear wheel to taillight area. Specify Left
or Right
in shopping cart. This item ships Oversized I and has separate shipping
charges.
1967-72
Suburban & 1967-70 Panel taillight rear corner section. Exactly like
original OEM gauge steel, with black EDP applied primer finish. Formed
exactly like OEM original. Specify Left
or Right
in shopping cart.
1967-72
Suburban & 1967-70 Panel rear inner quarter tail section backing
plate. This is the far rear inner panel. Exactly like original OEM gauge
steel, with black EDP applied primer finish. Formed exactly like OEM
original. Specify Left
or Right
in shopping cart.
1969-72
Blazer / Jimmy rocker box reinforcement assembly plate. This high quality
replacement part is manufactured for GMCPauls Truck Parts. This part
reinforces the following 3 major points on the underbody by bolting to and
joining the rocker box & end cap to the inside of bedside at the rear
door pillar and attaches to the step up in floor just behind front seat.
They are a direct bolt in replacement for the originals that commonly rust
out in these vehicles. It reinforces the rear of the rocker box to help
retain the door opening while you top is off. It also helps to keep
the Blazer's Door "B" pillar in the correct position. Original
16ga steel construction made in the USA.
Specify left or right in cart.
1969-72
Blazer / Jimmy rear cab floor support. This high quality replacement part
is manufactured for GMCPauls Truck Parts. They are a direct
replacement for the originals that commonly rust out in these vehicles. Original
16ga steel construction made in the USA from steel manufactured in USA
Specify left or right in cart. Picture
of Blazer / Jimmy rear cab floor support installed
1969-72
Chevy & GMC Blazer / Jimmy B-Pillar ( sits directly behind the rear
door pillar inside the bedside ) for the front door, B-Pillar attaches to
our rocker box reinforcement plate with 3 body bolts and then reinforces
the back side of the bedside and the back of the rear door pillar, and
rear cab support so as to prevent sagging and shifting of these highly
important structural components. 13 3/4"L X 4 3/4"W.
This high quality replacement part is manufactured for GMCPauls Truck
Parts. Original 16ga steel construction
made in the USA. Specify Left or
Right in cart.
Chevy Truck Parts | Chevrolet Truck Parts | GMC Truck
Parts | Chevy Truck Part | GMC Truck Part | Classic Truck Parts | Classic Chevy
Truck Parts | Classic GMC Truck Parts | Chevrolet Truck Part |
Used Chevy Truck Parts | Used GMC Truck Parts | Chevy Truck Restoration Part |
GMC Truck Restoration Part | Chevy Truck Body Parts | GMC Truck Body Parts
|Classic Truck Part | Classic Chevy Part | Custom Chevy Truck Part | Classic
Chevy Truck Part | Chevy Pickup Parts | Chevrolet Truck Body Part | Antique
Chevrolet Truck Part | Classic Chevrolet Truck Part | Chevy Restoration Part |
GMC Restoration Part | Chevrolet Pickup Parts | Chevy Pickup Part | GMC Pickup
Parts | GMC Pickup Part | Truck Restoration | Old Truck Parts | Pickup Truck
Parts | Chevrolet Suburban Parts |
Chevy Suburban Part | GMC Suburban Parts | Chevrolet Blazer Parts | Chevy Blazer
Parts | GMC Jimmy Parts | GMC Jimmy
| Chevrolet Panel Truck | Chevy Panel Truck | GMC Panel Truck
C5 Blazer | K5 Blazer | Chevy Silverado | GMC Sierra I Tahoe I Yukon