60-66 Suspension
& Steering Sway
Bars-Pitman Arms
Our lowering springs are engineered then
custom wound and tempered to the specific truck they are
purchased for based on ton rating, wheelbase, motor &
transmission size, bed style and if truck has A/C or not as
these all affect proper spring rating due to changes in weight
which we found is better than just pulling a set of lowering
springs off the shelf and the same springs shipped to a
6cylinder short wheelbase truck as are shipped to a V8big block
long wheelbase as the other companies do. Since they must be
manufactured allow 7-10 business days from order until delivery.
FREE
SHIPPING ON ORDERS OVER $500.00
( Does not include oversized bulky items with a
fixed shipping cost or truck freight items, offer applies
to the continental USA. ) WARNING: Cancer & Reproductive
Harm -www.P65Warnings.ca.gov
Descriptions
in Blue are
hyperlinks to pictures and or larger description.
Left = Drivers Side, Right = Passengers Side
Part
#
Description
Price
Quantity
63-66 Front Lowering Coil
Springs
Pair
149684
For 63-66
1/2 ton, Heavy Duty High Performance Front
Lowering Springs Available in 1, 2, or 3" drop. Sold as a
matched set. Proudly Made in the USA
$149.00
63-66 Rear Lowering Coil
Springs
Pair
149685
For
1963-66 1/2ton Heavy Duty High Performance rear lowering
springs. Available in 2, 3, 4, 5, or 6" drop. Sold as a
matched set. Proudly Made in the USA
$149.00
63-66
3/4 Ton Truck Front Lowering Coil Springs
Pair
12164738
For
63-66 3/4 ton trucks, Heavy Duty High Performance Front Lowering
Springs Available in 1", 2", 3" drop. Sold as a
calibrated matched set. These are not cheap imported car springs
like others sell these are custom
made in the USA and are calibrated
matched sets made specifically for the truck they will be
installed on. These have a
separate shipping cost as they ship separate bulk heavy weight
and do not qualify for free shipping. Proudly
made in the USANote - When using 3" front drop springs sometimes if
there is not enough stud length behind the upper a-arm shaft for
enough alignment shims it will then require you to use off set
upper ball joints or a off set upper a-arm cross shaft to
correct the camber during alignment.
$159.00
63-66
3/4 Ton Truck Rear Lowering Coil Springs
Pair
12164739
63-66
3/4 Ton truck Heavy Duty High Performance rear lowering springs.
Available in 2", 3", 4", 5" or 6" drop.
Sold as a calibrated matched set. These are not cheap imported
car springs like others sell these are custom
made in the USA and are calibrated
matched sets made specifically for the truck they will be
installed on. These have a
separate shipping cost as they ship separate bulk heavy weight
and do not qualify for free shipping. Proudly
made in the USA
$129.95
60-72
Coil Spring Retainer Cups
Each
387984
1960-72
Coil spring retainer cups, used to mount rear coils to trailing
arms and frame at top and bottom of springs.
Chevy Truck Parts | Chevrolet Truck Parts | GMC Truck
Parts | Chevy Truck Part | GMC Truck Part | Classic Truck Parts | Classic Chevy
Truck Parts | Classic GMC Truck Parts | Chevrolet Truck Part |
Used Chevy Truck Parts | Used GMC Truck Parts | Chevy Truck Restoration Part |
GMC Truck Restoration Part | Chevy Truck Body Parts | GMC Truck Body Parts
|Classic Truck Part | Classic Chevy Part | Custom Chevy Truck Part | Classic
Chevy Truck Part | Chevy Pickup Parts | Chevrolet Truck Body Part | Antique
Chevrolet Truck Part | Classic Chevrolet Truck Part | Chevy Restoration Part |
GMC Restoration Part | Chevrolet Pickup Parts | Chevy Pickup Part | GMC Pickup
Parts | GMC Pickup Part | Truck Restoration | Old Truck Parts | Pickup Truck
Parts | Chevrolet Suburban Parts |
Chevy Suburban Part | GMC Suburban Parts | Chevrolet Blazer Parts | Chevy Blazer
Parts | GMC Jimmy Parts | GMC Jimmy
| Chevrolet Panel Truck | Chevy Panel Truck | GMC Panel Truck
C5 Blazer | K5 Blazer | Chevy Silverado | GMC Sierra I Tahoe I Yukon