Bed Floor Parts
FREE SHIPPING ON
ORDERS OVER $500.00
( Does not include oversized bulky items with a fixed
shipping cost or truck freight items, offer applies to the
continental USA. ) WARNING: Cancer & Reproductive
Harm -www.P65Warnings.ca.gov
Descriptions
in Blue are
hyperlinks to pictures and or larger description.
Left = Drivers Side,
Right = Passengers Side
1967-72
Chevy & GMC Short bed stepside steel angle strips. Attach to the sides
of the bed by spot welding, where the
bedside attaches to the bed wood in stepside trucks. Stamped zinc coated
steel construction like originals.
Sold in pairs. This
item ships Oversized II and has separate shipping charges.
1967-72
Chevy or GMC long bed stepside steel bed side angle strips. Attach to the
sides of the bed by spot welding, where the
bedside attaches to the bed wood in stepside trucks. Stamped zinc coated
steel construction like originals.
Sold in pairs. This
item ships Oversized II and has separate shipping charges.
67-72
Short stepside polished stainless steel bed floor wear strips hold down
the bed wood, and protect the surface of the wood floor. Punched with
correct square mounting holes like original. 1.5" wide, 18ga. Sold in
a complete 7 piece sets. This item ships Oversized II and has
separate shipping charges.
67-72
Short fleetside polished stainless steel bed floor wear strips hold down
the bed wood, and protect the surface of the wood floor. Punched with
correct square mounting holes like original. 1.5" wide, 18ga.
Sold in a complete 11 piece sets. This item ships Oversized II and has
separate shipping charges.
67-72
Long stepside steel bed floor wear strips hold down the bed wood, and
protect the surface of the wood floor. Punched with correct square mounting
holes like original. 1.5" wide, 18ga. Stamped zinc coated steel
construction like originals. Sold in a complete 7 piece sets. This
item ships Oversized II and has separate shipping charges.
67-72
Long fleetside steel bed floor wear strips hold down the bed wood, and
protect the surface of the wood floor. Punched with correct square mounting
holes like original. 1.5" wide, 18ga. Stamped zinc coated steel
construction like originals. Sold in a complete 11 piece sets. This
item ships Oversized II and has separate shipping charges.
67-72
Stepside Rear Cross Sill.Panel
that hold's the rear of the bedsides together. This item ships Oversized II
and has separate shipping charges.
$125.00
67-72
Stepside Bed Cross Sills
Each
172859
2"
x 49 7/8" Stepside bed cross sill
predrilled with mounting plates included OR 1" x 49 1/2"
predrilled bed
reinforcement cross sill. Specify In Cart style and quantity needed. This item ships Oversized I and has separate
shipping charges.
67-72
Fleetside bed cross sill for wood floor with pre-punched holes &
brackets. 3 required per truck on Short Wheelbase & 5 required for
Long Wheelbase. Manufactured from steel.
This item ships Oversized II
and has separate shipping charges.
67-72
Fleetside bed cross sill for steel floor with pre-punched holes &
brackets. 3 required per truck on Short Wheelbase & 5 required for
Long Wheelbase. Manufactured from steel.
This item ships Oversized II and has separate
shipping charges.
67-72
Fleetside bed reinforcement cross sill for wood floor with pre-punched
holes & brackets. 49.5" long, this piece sits between wheel tubs
on fleetside beds. 1 required per truck short or long wheelbase,
Manufactured from steel. This
item ships Oversized I and has separate shipping charges.
67-72
Fleetside bed reinforcement cross sill for wood floor with pre-punched
holes & brackets. 72" long, this piece sits under front portion
of wheel tubs on
fleetside beds and extends from bed side to bed side. 1 required per truck short or long wheelbase, manufactured
from steel. This
item ships Oversized II and has separate shipping charges.
67-72
Fleetside rear bed cross sill for wood floor. Panel
that hold's the far rear of the bedsides together. Manufactured from
steel. This
item ships Oversized II and has separate shipping charges.
67-72
Fleetside rear bed cross sill for steel floor. Panel
that hold's the rear of the bedsides together that floor ends at.
This item ships Oversized II and has separate
shipping charges.
$140.00
69-72
Blazer / Jimmy Cargo Floor Front Cross Sill
Each
3510322
69-72
Blazer / Jimmy front cargo floor cross sill bed cross sill with pre-punched holes.
1 required per Blazer / Jimmy. This item ships Oversized I
69-72
Chevy Blazer and GMC Jimmy rear cargo floor cross sill (Tail Pan). Panel
that hold's the rear of the bedsides together that floor ends at.
This item ships Oversized II and has separate
shipping charges.
Exhaust
heat shield to protect your wood floor from exhaust heat damage. Attaches
to bottom side of wood floor where exhaust pipe radiant heat where it
arches over rear axle causes the adjacent wood to dry out and become
brittle and porous. 1 required for single exhaust and 2 required for dual
exhaust systems.
Chevy Truck Parts | Chevrolet Truck Parts | GMC Truck
Parts | Chevy Truck Part | GMC Truck Part | Classic Truck Parts | Classic Chevy
Truck Parts | Classic GMC Truck Parts | Chevrolet Truck Part |
Used Chevy Truck Parts | Used GMC Truck Parts | Chevy Truck Restoration Part |
GMC Truck Restoration Part | Chevy Truck Body Parts | GMC Truck Body Parts
|Classic Truck Part | Classic Chevy Part | Custom Chevy Truck Part | Classic
Chevy Truck Part | Chevy Pickup Parts | Chevrolet Truck Body Part | Antique
Chevrolet Truck Part | Classic Chevrolet Truck Part | Chevy Restoration Part |
GMC Restoration Part | Chevrolet Pickup Parts | Chevy Pickup Part | GMC Pickup
Parts | GMC Pickup Part | Truck Restoration | Old Truck Parts | Pickup Truck
Parts | Chevrolet Suburban Parts |
Chevy Suburban Part | GMC Suburban Parts | Chevrolet Blazer Parts | Chevy Blazer
Parts | GMC Jimmy Parts | GMC Jimmy
| Chevrolet Panel Truck | Chevy Panel Truck | GMC Panel Truck
C5 Blazer | K5 Blazer | Chevy Silverado | GMC Sierra I Tahoe I Yukon